Skip to product information
Photo - Primary

EBC 2013+ Fiat 500E Electric Ultimax2 Front Brake Pads

SKU: EBCUD1720

Sale price  $64.86 USD Regular price  $68.28 USD
Shipping calculated at checkout.

Special Order Item: Due to the Brand or supplychain issues, these parts are limited & hard to get. However, with FIP's relationships in the industry, we tend to get things done faster than most. If timing is a concern, CALL US (203)644-0712.

If you simply need a quality OEM replacement pad, look no further than Ultimax. Made in the UK Bristol EBC Brakes manufacturing plant Ultimax is a beautifully engineered brake compound that lasts well, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad.The Ultimax pad does include a small percentage of steel fibre to achieve its price point, far less content than our competition where steel fibre content can attain 50 volume and this optimum fibre blend is what makes Ultimax both popular and unique amongst brake blends .Once bedded in Ultimax will inspire confidence in any car light truck or SUV no matter how you drive.Its universal heat range abilities and low rotor wear are additional benefits of the Ultimax pad range which is the EBC worldwide number one selling brake with numbers of sets sold running into tens of millions over the recent years. Unlike many of our performance grades Ultimax has remain unchanged as a pad compound for ten years now, a true testament to its success and customer acceptance. Why change a winning formula.Black coded in the EBC range EBC Ultimax is a fully ECE R 90 approved brake pad range and at its lower price point, less than HALF the price of original parts yet TOTALLY EQUIVALENT by nature of its R 90 brake safety approval, Ultimax offers great value for money and first class driving safety.When replacing brakes of any kind please remember how important brake safety is to your own well being and either have a professional mechanic install your new brakes or if you are a qualified mechanic use the EBC installation DVD as a guide in support of your vehicle owner's manual. These installation guide DVD tasters can be viewed here and the full DVD purchased from online vendors.
Installation Instructions
Installation Instructions


This Part Fits:

Year Make Model Submodel
2019 Fiat 500 1957 Retro Edition
2013-2019 Fiat 500 Abarth
2013-2019 Fiat 500 Abarth Cabrio
2016 Fiat 500 c Easy
2013-2019 Fiat 500 c Lounge
2013-2019 Fiat 500 c Pop
2013-2019 Fiat 500 E
2019 Fiat 500 E-Sport
2016 Fiat 500 Easy
2013-2019 Fiat 500 Lounge
2013-2019 Fiat 500 Pop
2013-2016 Fiat 500 Sport
2013-2016 Fiat 500 Turbo

EBC Brakes frequently asked questions

What are the differences in the EBC brake pad colors?

There are several choices when shopping for EBC brake pads, and not all of them will apply to your driving style. Here's a quick guide to choose which color is best for you!

EBC Greenstuff Pads

Greenstuff pads are best suited for a daily driven application, with some spirited driving.

There's a slight increase in stopping power compared to stock pads and an improved pedal feel over the stock braking system.

EBC Redstuff Pads

Redstuff pads are a performance increase over Greenstuff, but with 80% less brake dust. 

Although they're a well-rounded pad, they're not recommended for track use because their softer compound does not brake as hard or for as long as EBC's Yellowstuff, Bluestuff, or Orangestuff.

EBC Yellowstuff Pads

Yellowstuff is the right choice if you're looking for mixed daily duty paired with track performance.

Offering much greater stopping power than Greenstuff or Redstuff, these can be used for hard driving on the road as well as being suitable for light track duty.

EBC Bluestuff Pads

Now you are left with one of the two highest-performing pads offered by EBC.

These pads are designed for medium to heavy track duty and may require to be wared-up to perform optimally. Bluestuff pads are aggressive and may wear your rotors at high rate.

EBC Orangestuff Pads

Orangestuff pads are the highest-performing pads offered by EBC in their distinct color line-up.

These are designed for heavy-duty track use/professional racing and are not recommended as a daily pad.

Why should I buy aftermarket brakes?

OEM brakes are great for daily driving, but they are much more expensive than aftermarket brakes and offer no improvement in braking power. Aftermarket brakes are available in a wide selection, from daily driving replacements to products built to handle the stresses of more aggressive driving, towing, heavy load, or racing.

What about brake dust?

Some brake dust is inevitable from every brake pad and it is impossible to totally eliminate dust otherwise brake vibration will occur. We never advertise zero dust, we only advertise less dust and we appreciate that in some cases dust will be almost the same as original pads. However, please note that dust is always more severe in the first 1000 miles of driving especially if pads were fitted to partly worn rotors. Another condition which promotes significant dust is wrong pad compound choice. If you have a car with over 200bhp (horse power) or drive above what we might call a spirited street level – for example green pads would not be suitable and Red Ceramic, being a slightly harder pad, can handle these higher speeds and loads and gives off less dust – there may be cases of overload where the Green pads are carbonising in use and a higher spec pad (Red Ceramic) is needed. If you have been sold greens and need reds, go back to the dealer where you purchased them and ask him for some sort of a deal to get you onto the correct brake compound. Yellow compounds are a fantastic brake, probably our best but they are equal in dust to original parts and should not be chosen if a low dust pad is what you need. Our cleanest pads are Red Ceramic for sedans and Green 7000 series for SUV and light trucks.

Brake Efficiency- when will these pads perform best?

All EBC coloured range pads – green, red and yellow – are high mileage compounds. and you cannot expect their optimum performance straight out of the box. Brake effect will be good and certainly safe, but not at their best. Pads need to be bedded in geometrically which could take 400-600 miles, even on new rotors and after that pads have to final cure chemically which can take another 1000 miles. Experience shows us that out of the box all EBC pads perform equal to or better than OEM parts and most other aftermarket parts but they just keep getting better with time so hang in there – and please don’t criticise the performance of the pads until they are fully bedded. Also during the life of the pads remember to monitor pad wear as half worn pads or more than half worn pads will cause a significant reduction in performance of the brake. In sport use and for optimum braking we recommend changing pads when there is 3/16 th inch (4mm) of friction material left on the steel backing plate and not to wear the pads any lower. Pads and calipers start to overheat when friction material goes below this level. Remember the faster and harder you drive, the faster pads will wear and a wrong spec pad could wear out surprisingly quickly so keep an eye on the pads, especially if you see more dust than expected. In race use wear will be much faster.

What about wear leads and audible wear indicators?

Many Asian and USA vehicles use a rivet on screech clip, a small gold coloured metal clip in a U form that contacts the rotor as the pads are low and makes a loud noise to remind you of the need for pad replacement. You only need one clip per set of pads and that is all EBC use in most cases. There is no need for multiple clips and there is no safety issue with less. Pads wear evenly unless there is a major caliper problem and one clip will alert you of a pad requiring replacement. This assumes of course that your calipers are functioning properly and sliding freely which is part of any routine brake install work. It is always good practice to check pad wear every 3000-5000 miles anyway, whether or not you have indicators of any type on your car.

European cars usually use a wear lead wire to operate a dash warning light. For VW and Audi models the lead is glued into the pad and the EBC pad comes with a new EBC lead in the pad. BMW, Mercedes and Saab models have loose wear leads which clip into the top of the pad. We sell these EBC leads separately on vendor’s web sites or at the dealer that supplied you. We do not provide these loose leads in our sets as the price is considerable and leads do not always need replacement.

Things that could pair well together with what you are looking at...

Your pit crew for parts

Real people making moves on your behalf to get you your parts the fastest way possible...

OUr client's love us

All of our reviews are verified by Judge.me via Post Order Satisfaction Follow-Ups...

Multiple Payment options

Visa/MC/AMEX/DISC - PayPay - Amazon, Apple & ShopPay as well as Financing from Affirm & ShopPay