Skip to product information
ZSPEC "Round Cowl-Clips" Replacement Solution for Z32 300zx, Titanium Fastener Kit w/ Well Nuts
SKU: ZSD-583711
$30.00 USD
Shipping calculated at checkout.
ZSPEC has developed clip-replacement solutions leveraging our famous titanium hardware coupled with Well Nuts. This solution is for the larger Round Clips that hold the Z32 300zx Cowl/Scuttle Panels down. Note, this kit does NOT replace the smaller rectangular clips (replacements are available in a separate listing).
Installation instructions:
1) Remove OE plastic clips and push ZSPEC Well Nuts into Clip Holes on body of vehicle (under cowl panels).
2) Position panels back in place and hand-start each titanium fastener with the included washer.
3) Tighten the fasteners and enjoy. Note, each fastener needs "snugged" in place...the back-side of each well nut will "bulge" holding the panel in place.
Why ZSPEC's Dress Up Bolts® hardware solution?
- Grade-5 Titanium Fasteners and Washers
- Completely reversible (no drilling like others)
Requires basic hand-tools for installation: plastic pry tool to remove clips and #5 hex-key for installation of the ZSPEC hardware (not included).
Fits Z32 300zx, replacing the six (6) LARGE ROUND COWL CLIPS.
Things that could pair well together with what you are looking at...
