Stance Corvette C5 & C6 Coilovers
Stance Corvette C5 & C6 Coilovers
Couldn't load pickup availability
Originally designed for use in professional motorsports, inverted monotube technology has many advantages over upright monotube dampers. The 45mm strut shaft offers increased lateral rigidity over competitor’s upright dampers that use 20mm shafts. If the shaft is not stiff enough it can cause the damper to bind under heavy loads and limit the suspension travel – leading to premature wear on the shaft seals & piston bands, causing oil leakage. STANCE inverted monotube dampers offer exceptional ride comfort without sacrificing performance.
Their piston has been developed to deliver a large range yet responsive adjustments. Even with this large adjustment range, each click is even and precise to provide excellent fine tuning ability. Winning races has taught us that compliance is key, even for competition setups. They know how allowed us to fine tune the valving balance providing you the ability to go from compliant & forgiving to firm & responsive with just a few clicks of the knob.
Digressive valving produces high damping forces at low shaft velocities & softer damping forces at high shaft velocities. Low speed damping gives better control of the chassis movement & provides quicker feedback to the driver, enhancing overall feel & confidence on the road & track. Digressive high speed valving profile blows off big bumps forces for smooth response, giving optimal chassis balance for maximum grip.
The Stance damping adjuster knob, or “Clicker”, is designed to offer an easy and convenient way to adjust the damping of your coilover. Their heavy-duty adjuster gives a very positive “click” for each of the 16 levels of adjustment, making it easy to keep track of your personalized settings.
Everything from wheel clearances to ride height adjustment is taken into account during the design process to make sure you experience a hassle free install of your new Stance coilovers.

Let customers speak for us
from 281 reviews
First Impression:
The coilovers look nice in the box. Everything arrived in good shape. The full print carton is nice, however don't like it sitting on my front porch for long (everyone driving by can see what I ordered).
Instructions:
The instructions are decent, however some additional detail would be helpful. Not a big deal, but some info on the top strut mounts would be helpful (just remove everything that was on the car, nothing is re-used, as reassurance). I removed the top control arm mounts for both front and rear to get it done... Worked ok, however I think the rears I should have removed the lowers. Live and learn!
I also cheated and cut the leaf springs, so I didn't have to mess around. Won't be going back on, so to the landfill they go! RIP sawzall blades.
The description for how to drill/make the holes in carpet is good and was fully utilized.
The preload instructions are decently written as well, with the different spring rates measurements being greatly appreciated.
Setting Ride Height:
Had a couple up and downs to get the ride height pretty close. Not a horrible experience. Being able to turn the body by hand is nice. A call out on the instructions of 1 turn = so many millimeters would be nice, with a mm to inch conversion table. The silvers video appears to be accurate, at 2MM per revolution, but that is predicated on you finding the video, and knowing it exists.
Calculating a baseline ride height and providing, for instance, if you turn 10 turns from bottomed out in the lower mounts = x inches of ride height measured at x location, with stock wheel size, would be an amazing addition.
Opportunities:
The biggest pain was the rear bolt on the rear top strut mounts. I know this is called out.... We had 6-7 different sockets, ratchet wrenches, straight wrenches, crows feet etc... They all suck. Not sure what the exact correct tool to use or approach, but I didn't find it. A design change or inclusion of the tool (****, charge $20 for it), would make for a much improved user experience.
First drive:
I had a leaking front passenger side strut, car was lowered on Bilstein b8 in the rear and stock disabled mag ride in the front. What a night and day difference. I hesitated on pulling the trigger on the coilovers for some time, as I wasn't sure the juice was worth the squeeze.
Well, if you're on the fence, just buy them. It is 1000000% worth it. The initial drive was in the wet, so couldn't push much. The car is much more direct, when you turn the wheel, the car goes where I want it to. Previously there was a little push and almost a delay on initial turn in. This is completely gone. General road manners are nice 10/12k (Thanks Brian!). I had all set to 12 clicks from full soft. The interstate feels great. All bumps feel much better all around and the car just feels more planted.
Future:
I look forward to dialing in the dampening as I figure out what I like and what feels the best for certain scenarios, as well as actually pushing the car. I have some work to do on ride height, but will put some more miles on prior to final adjustment and alignment.
Summary(TLDR):
Buy them dummy, its worth it!

Just what I needed for my 2016 wrx thanks
Brain was great to work with and the Raptor shift light is a 10 !

Worked as they should. Quick shipping

The correct one delivered new and in box. Shipped quicker than expected!

Brand new in sealed bag, correct product delivered.

Good deal, comes as described!

Arrived in perfect shape

When first purchasing the kit, it was very straight forward. I told them what I was looking to do, they directed me to the exact kit with everything needed included.
I recently had an issue with one of the struts, and FIP very quickly responded and handled everything with Silvers. New strut arrived at my doorstep within days.
Highly Recommend ordering with FIP.

Delt with this company online. Quick shipping and quick to call about my order to get it solved. 10/10 all around

Set of 3 hood vents installed on my 03 Z06, great product, fits great and pulls out the heat 🥵

Fast shipping great customer service

Brian at FI Performance always goes above and beyond to take care of customers. I am a repeat customer and will continue to use them for all my needs. Thanks again Brian, amazing as always!

Exactly what I needed for my lowered C5. Full range of adjustment and quality made product.

Got a great product. In a very timely manner very happy