Holley TERMINATOR X MAX FORD MOD MOTOR 4V - WITH TRANSMISSION CONTROL Package
Holley TERMINATOR X MAX FORD MOD MOTOR 4V - WITH TRANSMISSION CONTROL Package
Fits Ford 4 Valve Modular Motors with stock coils and EV6 injectors, and 4R70W transmission control. This package also includes their dash display and 2 various dongle cables. PN#'s at the bottom
Features:
- Plug and play engine control (for Ford Modular Engines, 4.6L 4V, or 5.4L 4V)
- Included transmission harness gives you plug and play control of 1998+ Ford 4R70W or 4R75W transmission.
- EV1 or EV6 injector harness included (depending on what harness is required for your injector configuration.)
- High Impedance Injector Drivers will safely power most stock injectors, and Holley EFI Injectors. - Injector support chart provided in the instructions (Will not control low impedance injectors)
- Included Bosch LSU 4.9 wideband oxygen sensor for accurate readings and precise tuning control
- Built in 1bar MAP (manifold absolute pressure) sensor, included - For Boosted applications – internal MAP sensor can be disabled and utilize external MAP sensor harness (kit includes a terminated connector for seamless installation)
- Vacuum hose adapters included - (1/8”, ¼”, and 3/16” sizes)
- 4 inputs – 12v, Ground, 5v, and frequency for items like pressure sensors, activation triggers, nitrous activation, or trans brake
- Boost Control – boost vs. time, boost vs. gear, boost vs. RPM, boost vs. speed, and boost safeties
- Nitrous Control – channels for wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR (Air/Fuel Ratio)
- Advanced Tables – ( 4x 1D tables, 1x 1D gear table, 4x 2D table, and 1x 2D gear tables) for nearly unlimited table configuration options
- On-board diagnostic LEDS - ECU power, engine run, TPS calibration, cam signal, and more! Identify critical engine parameters at a glance
- 3.5” touchscreen handheld included - Internal data-logging, custom gauge display, and calibration wizard allow quick building bases tunes for any Domestic V8 engine
- Compact ECU (Engine Control Unit) – At only 7.45” x 4.1” x 1.66” the compact packaging allows mounting virtually anywhere (XMAX ECU = 9.6” x 4.1” x 1.66”). REMINDER: diagnostic LED’s must face up!
- FREE EFI Tuning software – For compete control of your Terminator X power plant
Includes:
Let customers speak for us
from 211 reviewsI can't say enough about silvers and brian. I recently got into an accident that broke one of my coilovers. Brian immediately reached out to his people and got me a single coilover. You can't go wrong with silvers or brian.
I am well pleased in choosing brian and crew for my coilovers. They have been very helpful and got me my order right away.
worked perfect. Install was a breeze! everything was great! Except for the waiting period due to transitioning. maybe next order will be super quick. Thanks Brian for keeping in touch.👍🏼
These are by far a major upgrade over stock the oem rubber mounts couldn't take the abuse and shredded leaking luid all over the engine bay and leaving my engine flopping the amt mounts are a mix of metal on the outside and inside and a hard rubber "bushing" in the middle giving you the best of both worlds and making it durable and everything tighter very easy to install and torque down looks better and definitely feels better very minimal increase in noise and vibration but not enough to really notice or effect everyday driving a must have for higher horsepower applications or if you just beat the **** out of it.
This is a high quality 3D printed guage mount that is installed and replaces the driver's left side heat vent to mount your gauge to and it will still blow air through it without any issues as it's vented on the top and bottom it installs very easy and fast and will fit multiple different gauges and is very sturdy and strong if you have a AEM guage this is not the correct mount they make a specific mount for the AEM gauges.
This bracket is for the c6 corvettes with the Z51 package only not the Z06 they have different coolers and therefore different brackets with that being said this bracket works fantastic definitely when using it with the A&A supercharger kit and don't want to delete your oil cooler like me and so this allows you to move your cooler to a different location and out of the way and still be able to use it with the supercharger.
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!
These are a great upgrade for the rear suspension!! Love the adjustability and the look of them much better than stock. Brian always gives excellent customer service and the parts ship out very fast.
I spoke with Brian about my setup and he gave me his recommendation on which Silvers to go with and he was spot on!! It is a night and day difference from the stock suspension and I couldn't be happier!!!
I couldn't be happier with the mcleod twin disk clutch setup it shipped and arrived very fast everything was packaged very nicely and secured it came with very detailed instructions on how to install everything properly also comes from the factory already pre-fitted with ARP hardware so that's definitely a plus! Excellent company Brain is a great guy and super knowledgeable will always help with anything!
This is a very well done piece with very nice hardware. Install was easy thanks to easy to follow instructions.
Use Oil extreme Four engine longevity. Nothing else like it, get it.
Got in contact with Brian and he help me spec out my silvers neomax coilovers and gave a recommendation for Baer front tie rod ends and rear toe arms as well as aFe sway bar endlinks. Install is easy and straightforward, it may take a while for the first time but it’s hard to mess up as long as you follow the instructions. Car feels brand new now, it’s a night and day difference and yet the car still desperately needs an alignment. The bumps that used to make the whole car float and sway side to side are much less noticeable. I still haven’t touched the dampening which is set in the middle on all 4 corners, and while it’s a little on the stiff side I like the ride much more. The car doesn’t wheel hop over bumps or float anymore, way less body roll, hooks and pulls better, and looks way better after dropping it around 2.5 inches from stock height. Everyone with a c5 on stock suspension should definitely consider these silvers.
Looks good. Hopefully I can get it installed correctly. Should stiffen up the diff alot