Holley 550-931 TERMINATOR X 58X/1X EV6 LS MPFI KIT WITH DBW THROTTLE BODY CONTROL
Holley 550-931 TERMINATOR X 58X/1X EV6 LS MPFI KIT WITH DBW THROTTLE BODY CONTROL
Couldn't load pickup availability
Terminator X Max features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Part number 550-929 also has Drive-by wire throttle body control. Terminator X Max comes fully loaded with base maps for common LS engine combinations to get you out of the garage and on the road/track fast. The 3.5" touch screen LCD handheld contains an easy to use calibration wizard as well as tuning and gauge display functions. Also included is Holley EFI's industry-leading, easy to use software suite that allows full laptop access for advanced users. Whether you are building a budget beater or a boosted race car, Terminator X MAX has the features and technology you need at a price that won't break the bank!
Features:
- Designed for GM 4.8/5.3/6.0 LS Truck Engines and LS2/LS3 with 58x Crank, 4x Cam and a Drive-By-Wire Throttle Body, with EV6 Injectors.
- Real-Time fuel map learn, takes the guess work out of tuning your base fuel table.
- High Impedance Injector Drivers will safely power most Stock LS injectors, and Holley EFI Injectors. Injector support chart provided in the instructions (Will not control Low Impedance Injectors)
- All of the new Terminator X systems utilize the Bosch LSU 4.9 wideband to relay AFR information to the ECU for accurate reading and precise tuning control.
- On-Board 1bar MAP sensor, is perfect for N/A or Nitrous engine combos. If your combination requires a 2+Bar, we recommend GM 12592525, and our adapter part number 558-416.
- 4 Outputs โ Ground, PWM - , for accessories such as; fans, boost control, nitrous control, IAC Kit, and More
- 4 Inputs โ 12v, Ground, 5v, and Frequency, for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake
- Boost Control โ Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties
- Nitrous Control โ Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR
- Advanced Tables โ 4x 1D Tables, 1x 1D per Gear Table, 4x 2D Tables, 1x 2D per Gear Table, can be used for any custom tables you can dream up, such as Flex Fuel Sensor Offset Table, or a custom fuel or oil pressure safety!
- On-Board Diagnostic LEDS for: ECU Power โ Engine Run โ Wideband Status โ TPS Calibration โ Crank Signal โCam Signal. Allow you to identify any Critical engine issues at a glance
- The included 3.5" Touchscreen Handheld contains a calibration wizard, that allows you to quickly build a base tune for any LS engine. Additionally the handheld provides internal data-logging and a fully customizable gauge display.
- The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDS must face up!
- Plug and play compatible with more Holley EFI accessories such as; analog style gauges, shift lights, various modules, and coming soon, 12.3" digital dash support!
- Free EFI Tuning Software for complete control of your Terminator X power plant
- Recommended Pedal part number - 10379038
- Includes: 58x/4x LS Engine Main Harness - EV6 Injector Harness - DBW Throttle Body Harness - Terminator X MAX ECU - ECU Main Power Harness - Bosch LSU 4.9 Wideband Oxygen Sensor - Input/Output Harness - and assorted vacuum adapters.
Let customers speak for us
I went with the super low, extended rear shocks , Swift 9/7k upgrade and absolutely love the stance and how the truck rides. Itโs tight in the corners , smooth driving down the hwy and not bouncy at all. Thanks to Brian for getting me set up.
Everything seems in good condition and good quality, appreciate the help from brian for all my questions and to setup the shipping to canada
Hello, these coil overs are great. Very good quality and look great! Thank you!!
Great product shipped out fast easy install.
Brian R. was extremely helpful and spent a good amount of time answering my questions about switching to coilovers. He was a wealth of knowledge and made the purchasing and installation process very easy.
He is so genuine, he helped me out on which parts I should get for my wifeโs โ16 Veloster Turbo. Parts came super fast and was packaged beautifully
Havn't installed yet so I cannot speak to the parts, as they get some run time I will review. Brian at FI was amesome though all through the process. Had questions prior to ordering and he went above and beyond in providing me with answers. After I ordered the parts he called a few days later appologizing for not reaching out sooner, which is crazy cool since country was dealing with hurricane devestation. I didnt expect to recieve parts for a while however they all showed up in about a week. I will def do buisiness with them again and recommend them to anyone in the future.
I bought Silvers Neomax coilovers with aero spring rates (14k/12k) for my track car. The quality of them is great. Install was straight forward and they are easy to adjust and tune as needed. Real happy with them so far and I think they're the best value out there in coilovers. Great price without a sacrifice in quality or performance. Also Brian at FI PERFORMANCE has been great in responding to all of my questions. Has been a great experience so far.
Quality part.
Brian answered every time I called and answered all the questions
Excellent coilovers
The best customer service from Brian
Highly recommended
Car looks great and. Handles amazing
Works great it stiffens up the rear end and no more wheel hop best diff brace out of all I have used in the past, money well spent.
Installed the After Dark hooks on my C5: the rear hook was very easy, and if you only need one hook, it's a quick and easy install. Front is more work: you're going to want a step drill or right angle adapter, since clearance between the bumper and A/C condenser is tight. Drilling into the bumper is not trivial: it's hard, use cutting fluid and make sure your drill bits are sharp. Once it's drilled and the rivnuts are installed, it's easy from there. It's a good design, well made, and at a reasonable price.
The product was originally marked for 2005 and up gx470. I managed to fit it into my 2003 by flipping one of the front hanger mounts. Sound is throaty and deep a bit loud at first. But the sound has mellowed out after a few hundred miles. Hardest part was removing old exhaust had to use Sawzall. Make sure to buy the 2.5 donut gasket ahead of time. The system is high clearance. Its tucked between the frames no chance of hang ups.
Itโs the best mod Iโve done. Should have been the first thing I did.
