Pulsar LT for 19-22 GM 1500 3.0L Diesel
Pulsar LT for 19-22 GM 1500 3.0L Diesel
2019-2022 Silverado/Sierra 1500 3.0L | Range Technology Pulsar LT in-line module 22412
Features:
- Adjust Throttle Response
- Top Speed Limiter (82-124mph)
- Calibrate Tire Size (29" - 50.9")
- Manual DPF Regen
- Transmission Relearn
- Modify Gear Ratio (2.00 - 6.99)
- Clear Diagnostic Trouble Codes
- High Idle 700-1100 RPM
- Reprogram TPMS Threshold (40 - 99 PSI)
- Simple Installation Process
- Does Not Modify ECM
- Leaves Factory Warranty Intact
The Pulsar is an in-line computer that connects directly to the vehicle PCM, eliminating unnecessary wires in the engine compartment. By connecting directly to the trucks PCM, Edge has the ability to control the vehicle's signals to optimize performance gains, throttle response, mileage, and more. The Pulsar can completely change your driving experience to optimize performance and drivability in every situation.
50 State Legal | No | ||
---|---|---|---|
Brand | Pulsar | ||
Emission Code | 7 | ||
Product Type | Inline Chips and Modules | ||
UPC |
|
||
Part Number | 22412 |
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Let customers speak for us
from 211 reviewsI can't say enough about silvers and brian. I recently got into an accident that broke one of my coilovers. Brian immediately reached out to his people and got me a single coilover. You can't go wrong with silvers or brian.
I am well pleased in choosing brian and crew for my coilovers. They have been very helpful and got me my order right away.
worked perfect. Install was a breeze! everything was great! Except for the waiting period due to transitioning. maybe next order will be super quick. Thanks Brian for keeping in touch.👍🏼
These are by far a major upgrade over stock the oem rubber mounts couldn't take the abuse and shredded leaking luid all over the engine bay and leaving my engine flopping the amt mounts are a mix of metal on the outside and inside and a hard rubber "bushing" in the middle giving you the best of both worlds and making it durable and everything tighter very easy to install and torque down looks better and definitely feels better very minimal increase in noise and vibration but not enough to really notice or effect everyday driving a must have for higher horsepower applications or if you just beat the **** out of it.
This is a high quality 3D printed guage mount that is installed and replaces the driver's left side heat vent to mount your gauge to and it will still blow air through it without any issues as it's vented on the top and bottom it installs very easy and fast and will fit multiple different gauges and is very sturdy and strong if you have a AEM guage this is not the correct mount they make a specific mount for the AEM gauges.
This bracket is for the c6 corvettes with the Z51 package only not the Z06 they have different coolers and therefore different brackets with that being said this bracket works fantastic definitely when using it with the A&A supercharger kit and don't want to delete your oil cooler like me and so this allows you to move your cooler to a different location and out of the way and still be able to use it with the supercharger.
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!
These are a great upgrade for the rear suspension!! Love the adjustability and the look of them much better than stock. Brian always gives excellent customer service and the parts ship out very fast.
I spoke with Brian about my setup and he gave me his recommendation on which Silvers to go with and he was spot on!! It is a night and day difference from the stock suspension and I couldn't be happier!!!
I couldn't be happier with the mcleod twin disk clutch setup it shipped and arrived very fast everything was packaged very nicely and secured it came with very detailed instructions on how to install everything properly also comes from the factory already pre-fitted with ARP hardware so that's definitely a plus! Excellent company Brain is a great guy and super knowledgeable will always help with anything!
This is a very well done piece with very nice hardware. Install was easy thanks to easy to follow instructions.
Use Oil extreme Four engine longevity. Nothing else like it, get it.
Got in contact with Brian and he help me spec out my silvers neomax coilovers and gave a recommendation for Baer front tie rod ends and rear toe arms as well as aFe sway bar endlinks. Install is easy and straightforward, it may take a while for the first time but it’s hard to mess up as long as you follow the instructions. Car feels brand new now, it’s a night and day difference and yet the car still desperately needs an alignment. The bumps that used to make the whole car float and sway side to side are much less noticeable. I still haven’t touched the dampening which is set in the middle on all 4 corners, and while it’s a little on the stiff side I like the ride much more. The car doesn’t wheel hop over bumps or float anymore, way less body roll, hooks and pulls better, and looks way better after dropping it around 2.5 inches from stock height. Everyone with a c5 on stock suspension should definitely consider these silvers.
Looks good. Hopefully I can get it installed correctly. Should stiffen up the diff alot