60 LB Siemens Deka EV6 High Impedance FI114191
60 LB Siemens Deka EV6 High Impedance FI114191
Couldn't load pickup availability
60lb/h Siemens Deka High Impedance (Long Style) with EV6 / USCAR Connector – FI114191 (60mm)
Genuine Siemens / Mototron DEKA IV High Impedance Injectors with USCAR EV6 Connector
These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.
The EV6 / USCAR injector connector can be found on many late-model GM (LS2, LS3, LS7), Dodge (Hemi), Ford (Modular) and select import motors. We also offer the same injector with the EV1 connector as Part Number FI14961. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors!
FEATURES:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility
Specifications:
Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: USCar EV6
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Spray Pattern: 30 Degree Spray Cone
Length: 60mm (o-ring – o-ring)
Factory fitted with Viton upper and lower o-rings
Equivalent Part Numbers:
Siemens FI114191
Siemens 108-191 (108191)
Dimensions:
Dimensions, other than the connector, are identical to the FI114961 EV1 Siemens Deka IV Long Injectors
Let customers speak for us
Brian R. was extremely helpful and spent a good amount of time answering my questions about switching to coilovers. He was a wealth of knowledge and made the purchasing and installation process very easy.
He is so genuine, he helped me out on which parts I should get for my wife’s ‘16 Veloster Turbo. Parts came super fast and was packaged beautifully
Havn't installed yet so I cannot speak to the parts, as they get some run time I will review. Brian at FI was amesome though all through the process. Had questions prior to ordering and he went above and beyond in providing me with answers. After I ordered the parts he called a few days later appologizing for not reaching out sooner, which is crazy cool since country was dealing with hurricane devestation. I didnt expect to recieve parts for a while however they all showed up in about a week. I will def do buisiness with them again and recommend them to anyone in the future.
I bought Silvers Neomax coilovers with aero spring rates (14k/12k) for my track car. The quality of them is great. Install was straight forward and they are easy to adjust and tune as needed. Real happy with them so far and I think they're the best value out there in coilovers. Great price without a sacrifice in quality or performance. Also Brian at FI PERFORMANCE has been great in responding to all of my questions. Has been a great experience so far.
Quality part.
Brian answered every time I called and answered all the questions
Excellent coilovers
The best customer service from Brian
Highly recommended
Car looks great and. Handles amazing
Works great it stiffens up the rear end and no more wheel hop best diff brace out of all I have used in the past, money well spent.
Installed the After Dark hooks on my C5: the rear hook was very easy, and if you only need one hook, it's a quick and easy install. Front is more work: you're going to want a step drill or right angle adapter, since clearance between the bumper and A/C condenser is tight. Drilling into the bumper is not trivial: it's hard, use cutting fluid and make sure your drill bits are sharp. Once it's drilled and the rivnuts are installed, it's easy from there. It's a good design, well made, and at a reasonable price.
The product was originally marked for 2005 and up gx470. I managed to fit it into my 2003 by flipping one of the front hanger mounts. Sound is throaty and deep a bit loud at first. But the sound has mellowed out after a few hundred miles. Hardest part was removing old exhaust had to use Sawzall. Make sure to buy the 2.5 donut gasket ahead of time. The system is high clearance. Its tucked between the frames no chance of hang ups.
It’s the best mod I’ve done. Should have been the first thing I did.
Brian was extremely kind and helpful to make sure I was getting set up with the correct products. The Brey Krause harness bar is extremely high quality. Don’t cheap out on safety stuff this is definitely the harness bar you want in your c5. The combination of great service from Brian and the quick arrival I highly recommend FI Performance and will definitely be using them in the future!
Five stars for the parts and service. Ride quality is better than expected for a coilover setup. And Brian was super helpful in getting the correct setup for my truck
Fits perfectly and does exactly what it needs to do. No complaints.
Brian recommended these end links after sharing my plans to do some HPDE, Autocross and Street driving for the C5 Z06. The parts feel great, I did have a warranty issue that was addressed by both Brian and AFE, I was very satisfied that they took care of my issue in a timely manner as well. Highly recommend both Brian and AFE, thank you as always for your help!
