FDF RaceShop - RX7 FC MANTIS ANGLE KIT

2-3 WEEK LEAD TIME

The Rx7 Mantis Angle Kit.

Using a 2 piece lower control arm we can effectively perfect the caster without binding the control arm from adjustments. Our kit uses spherical bearings and gets rid of the very weak stock lower ball joint that other kits tend to still use.

-Angle, 70 degrees depending on your wheel size and offset

-Ackerman, adjustable Ackerman

-Roll Center, optimized handling by adding 40mm of roll center correction

-Bump steer, minimal bump steer in drift by perfecting tie-rod  pitch angle

-Caster, added trail and reduced caster which adds more grip by increasing tire contact patch, causes less bump steer, less jacking from lock to lock, increase transition speed, effortless transition while on throttle

-Camber, optimized camber ranging from -3 to -6

-Track Width, 50-70mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to full lock at any point throughout  suspension travel for increased grip 

-Joints, Chromoly Heim joints and spherical bearings with self-lubricating nylon race, easily replaceable 

-Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumple zone to save mounting points from failing under impact, 7075 aluminum used where possible which provides steel-like strength at 40% weight reduction. 

NOTE: Please let us know which wheel bearing you have currently. 

2 weeks waiting time added for custom color.

Please allow 2-3weeks for fabrication before the item is sent.