• $1,893.00
    Unit price per 
Shipping calculated at checkout.

The Mantis Kit for the Corvette C5/C6 is the most relevant angle kit in today's drift society, and here's why:

-Angle, 70 degrees depending on your wheel setup and length of control arms

-Tie-rods, Outer tie-rods  included, these fasten to the stock inner tie-rods 

-Ackerman, adjustable Ackerman options from Positive - zero - negative 

-Roll Center, optimized handling by adding 25mm of roll center correction

-Bump steer, perfected bump steer for drifting

-Caster, modifications made to the displaced caster amount giving a good self-steer feel for the driver and maximizing the performance for drifting

-Camber, optimized camber ranging from -3 to -6

-Track Width, 25-75mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to full lock at any point throughout  suspension travel for increased grip 

-Joints, Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable 

-Weight Reduction, compact drop knuckle design makes for a lightweight and strong design, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction. 



Please allow 2-3weeks of fabrication before the item is sent.

Extended Brake Lines Are An Absolute Must!  If you don't have them already, we have setup the website to default select that you need to order those too.  If you already have extended lines, great!  Select "I already have extended brake lines" and it will take those off the kit total.  Without them, your stock lines WILL SNAP and you will have a bad day!

FI Performance is a proud FDF Dealer in partnership with DriftHQ and we usually have kits ready to go however due to demand, sometimes there will be a 2-3 week wait.  If you have any questions, please call us directly at 203-644-0712 and ask for Brian.

CHECK OUT the Warvette in action rolling on Silver's Coilovers & the FDF Mantis Angle Kit