FDF RaceShop - BMW E36/E46 ANGLE KIT TIEROD UPGRADE
FDF RaceShop - BMW E36/E46 ANGLE KIT TIEROD UPGRADE
We have analyzed the BMW E36/E46 chassis after years of data and designed some much needed high strength, long-lasting parts.
The tierod upgrade uses only Chromoly, and 7075 aluminum to make up its construction. what does it do? and why do you need it?
What it does is gets rid of your OEM socket ball joint inner, and replaces it with a Chromoly adaptor that allows you to use a high strength rod end. These rod ends have an extremely long life, especially when used in an inner tierod application. The best part is when it does need to be replaced, it is only a $17US part.
Why you might need these is because the additional load applied to the inner tierod vastly exceeds the designed load intended while drifting. This wears the socket out quickly, causing you to need replacements often and affects your alignment over time as they wear out. Our design can be adapted to any angle kit, FDF, wisefab, SLR, and be used in conjunction to improve the handling and longevity of your angle kit and tierods.
the further explain the options available, please see the description below
Without outer Heim joint - Choose this option for FDF or SLR kits
With outer Heim joints - Choose this option if you are adapting these tierods to a custom kit, or to wisefab.
the outer tierod is a Left hand 5/8-18, and this joint can be adapted to any kit with a different set of spacers. if you have questions, send us and email and we will get right back to you!
E36 - Tie rod body 11.5"
E46 - Tie rod body 13.5"
For "Other" please email or add in the order notes how long you need your tie rods to be (measurement for the rack to knuckle)
Let customers speak for us
from 219 reviewsQuality was top notch. Install and fit was perfect. Thank you to Brian for going out of his way to get these to me.
Excellent quality , Brian was great help , very knowledgeable and professional will definitely buy again.
Brian”s great! Fast shipping great communication.
smooth ride even bottomed out, Brain does great on his customer service
Fit perfect
THIS IS AN AWESOME COMPANY TO DO BUSINESS WITH, THEY ARE VERY PROMPT TO TAKE CARE OF YOUR ORDER AND THEIR PRODUCTS ARE THE VERY BEST. AWESOME JOB!!!
I've tried 3 different diff mounts. The Lux Mount by SacCity, AMT Double Barrel, and just for the **** of it the Duralast c5 mount. Finally bought this 954 Bullet from FI Performance. In a nutshell the 954 had the least NVH of them all and best of all zero wheel hop even with crappy tires. Thanks Mr. Brian for your vast knowledge on this subject.
I purchased this kit and the install was fairly straightforward, the quality of the kit is amazing!!! Made a very noticeable difference in tightening up the entire suspension, and I did not notice an increase in NVH.
I can't say enough about silvers and brian. I recently got into an accident that broke one of my coilovers. Brian immediately reached out to his people and got me a single coilover. You can't go wrong with silvers or brian.
I am well pleased in choosing brian and crew for my coilovers. They have been very helpful and got me my order right away.
worked perfect. Install was a breeze! everything was great! Except for the waiting period due to transitioning. maybe next order will be super quick. Thanks Brian for keeping in touch.👍🏼
These are by far a major upgrade over stock the oem rubber mounts couldn't take the abuse and shredded leaking luid all over the engine bay and leaving my engine flopping the amt mounts are a mix of metal on the outside and inside and a hard rubber "bushing" in the middle giving you the best of both worlds and making it durable and everything tighter very easy to install and torque down looks better and definitely feels better very minimal increase in noise and vibration but not enough to really notice or effect everyday driving a must have for higher horsepower applications or if you just beat the **** out of it.
This is a high quality 3D printed guage mount that is installed and replaces the driver's left side heat vent to mount your gauge to and it will still blow air through it without any issues as it's vented on the top and bottom it installs very easy and fast and will fit multiple different gauges and is very sturdy and strong if you have a AEM guage this is not the correct mount they make a specific mount for the AEM gauges.
This bracket is for the c6 corvettes with the Z51 package only not the Z06 they have different coolers and therefore different brackets with that being said this bracket works fantastic definitely when using it with the A&A supercharger kit and don't want to delete your oil cooler like me and so this allows you to move your cooler to a different location and out of the way and still be able to use it with the supercharger.
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!