Audi R8 V10 / V10 Plus Coupe 4S Gen 2 Carbon Fiber Rear Bumper Blades 2016 - 2019

2016–2019 Audi R8 V10 / V10 Plus Coupe 4S Gen 2 Rear Bumper Blades – Carbon Fiber

Add a sharp, motorsport-inspired detail to the rear of your second-generation Audi R8 V10 or V10 Plus Coupe with these carbon fiber rear bumper blades. Supplied as a handed pair for the lower rear bumper corners, the blades visually widen the rear stance and give the R8 a more aggressive, track-inspired presence while adding a genuine carbon weave finish.

Build

• Material: Genuine carbon fiber, autoclave cured using a 3D design and CNC moulding process for consistent resin distribution and a tight, uniform weave
• Surface finish: High-gloss epoxy-polished top coat that holds its deep carbon appearance through sustained outdoor and driving exposure without fading or yellowing
• Configuration: Supplied as a handed pair (left and right) for a symmetrical installation across both lower rear bumper corners
• Weight: Lightweight at approximately 0.65 kg for the complete pair

Design & Finish

• Aggressive stance: Blade profile at the lower rear corners visually widens the rear stance for a more track-inspired look
• Carbon aesthetic: Directional weave and gloss finish complement the R8's factory bodywork for a coordinated, motorsport-grade appearance
• Factory-style integration: Precision-molded to follow the contours of the factory rear bumper for a clean, seamless fit

Fitment

• 2016–2019 Audi R8 V10 Coupe (second generation, Type 4S)
• 2016–2019 Audi R8 V10 Plus Coupe (second generation, Type 4S)
• Body style: Coupe (2-door) only
• Fits the factory rear bumper only — not compatible with aftermarket bumpers
• Not compatible with the first-generation R8 (Type 42, 2008–2015) or the Spyder

Package Contents

• 2 × carbon fiber rear bumper blades (left and right)
• Pre-applied adhesive tape for installation

Installation

• No-drill, adhesive-mounted: Installs with the included adhesive tape — no drilling and no permanent modification to the factory bumper
• Surface prep: Thoroughly clean, degrease, and dry the bumper at each blade position before fitting to ensure maximum adhesion
• Check orientation: The blades are handed — confirm correct left and right sides before final adhesion
• Professional installation recommended for the best positioning, symmetrical alignment, and finish

Before You Install

• Confirm your R8 is a second-generation Coupe (2016–2019, Type 4S) before ordering
• Verify body style and generation using your model year and chassis code if you are unsure
• Installation is reversible, but adhesive removal and re-prep may be required if pieces need repositioning