A&A CORVETTE C5/C6 SUPERCHARGER MOUNTING BRACKET WITH ADJUSTABLE BILLET TENSIONER
A&A CORVETTE C5/C6 SUPERCHARGER MOUNTING BRACKET WITH ADJUSTABLE BILLET TENSIONER
Couldn't load pickup availability
A&A C5 SUPERCHARGER MOUNTING BRACKET WITH ADJUSTABLE BILLET TENSIONER
- The mounting bracket/tensioner assembly is state of the art
- Unsurpassed belt wrap on the supercharger pulley
- Unsurpassed belt wrap on the crackshaft pulley
- Standard Polished Finish
- Standard Fitment Vortech Head Units
Each plate is machined on both sides to assure absolute flatness and accuracy. Super strong bracing, Grade 8 hardware, all steel pulleys with dual bearings, stainless or aluminum stantions for proper bearing support and their adjustable billet tensioner are all standard. The brackets are also set up to use 6 or 8 rib drive pulleys without modification, right out of the box
These bracket assemblies have often been described as “jewelry”. Look at the overall quality of the machine work and components. It really is a work of art.
Combined with their billet tensioner, the A&A bracket offers unsurpassed belt wrap on the supercharger pulley as well as the crankshaft pulley for exceptional grip.
Each tensioner is machined from 9.6 pounds of 6061 Aluminum bar. The shaft is precision machined 4340 Chromoly steel. The tensioner rotates on German manufactured bearings that are precision fit much like an engine bearing. The bores are set for a certain amount of “crush” so that the shaft to bearing clearance is within the range specified by the bearing manufacturer.
That’s the quality side of the tensioner assembly. On the practical side, we have 3 internal spring settings. A 1000 HP drag racer obviously needs more spring pressure than a 600 HP daily driver, right? This can be accomplished with just one tensioner! We even have an optional spring for super high horsepower drag racers. There is also a “lock pin” so the tensioner can be rotated to the slack position and locked in place. This is a huge help when installing a belt, changing an alternator etc. Fighting the spring tensioner is a thing of the past.
Belt changes are accomplished from the top with no need to go under the car at all.
No other manufacturer has a tensioner that is even close to this in both quality and practicality.
Each one is hand assembled at the A&A facility and checked for proper operation and spring tension with a digital torque meter. NOBODY else does that but A&A! This is why we have been an A&A Dealer for 15+ years, quality and support above all else.
In fact, the FI Performance in-house Z06 has been on A&A technology (custom) since 2005
Please select tensioner clock option: The lower tensioner can be pre-clocked clocked for their secondary drive with an overdrive crank pulley.
Let customers speak for us
I went with the super low, extended rear shocks , Swift 9/7k upgrade and absolutely love the stance and how the truck rides. It’s tight in the corners , smooth driving down the hwy and not bouncy at all. Thanks to Brian for getting me set up.
Everything seems in good condition and good quality, appreciate the help from brian for all my questions and to setup the shipping to canada
Hello, these coil overs are great. Very good quality and look great! Thank you!!
Great product shipped out fast easy install.
Brian R. was extremely helpful and spent a good amount of time answering my questions about switching to coilovers. He was a wealth of knowledge and made the purchasing and installation process very easy.
He is so genuine, he helped me out on which parts I should get for my wife’s ‘16 Veloster Turbo. Parts came super fast and was packaged beautifully
Havn't installed yet so I cannot speak to the parts, as they get some run time I will review. Brian at FI was amesome though all through the process. Had questions prior to ordering and he went above and beyond in providing me with answers. After I ordered the parts he called a few days later appologizing for not reaching out sooner, which is crazy cool since country was dealing with hurricane devestation. I didnt expect to recieve parts for a while however they all showed up in about a week. I will def do buisiness with them again and recommend them to anyone in the future.
I bought Silvers Neomax coilovers with aero spring rates (14k/12k) for my track car. The quality of them is great. Install was straight forward and they are easy to adjust and tune as needed. Real happy with them so far and I think they're the best value out there in coilovers. Great price without a sacrifice in quality or performance. Also Brian at FI PERFORMANCE has been great in responding to all of my questions. Has been a great experience so far.
Quality part.
Brian answered every time I called and answered all the questions
Excellent coilovers
The best customer service from Brian
Highly recommended
Car looks great and. Handles amazing
Works great it stiffens up the rear end and no more wheel hop best diff brace out of all I have used in the past, money well spent.
Installed the After Dark hooks on my C5: the rear hook was very easy, and if you only need one hook, it's a quick and easy install. Front is more work: you're going to want a step drill or right angle adapter, since clearance between the bumper and A/C condenser is tight. Drilling into the bumper is not trivial: it's hard, use cutting fluid and make sure your drill bits are sharp. Once it's drilled and the rivnuts are installed, it's easy from there. It's a good design, well made, and at a reasonable price.
The product was originally marked for 2005 and up gx470. I managed to fit it into my 2003 by flipping one of the front hanger mounts. Sound is throaty and deep a bit loud at first. But the sound has mellowed out after a few hundred miles. Hardest part was removing old exhaust had to use Sawzall. Make sure to buy the 2.5 donut gasket ahead of time. The system is high clearance. Its tucked between the frames no chance of hang ups.
It’s the best mod I’ve done. Should have been the first thing I did.
