SLR Speed BMW Race Kit (3 Series) Circuit Use
SLR Speed BMW Race Kit (3 Series) Circuit Use
Intended for 1982 to 2006 BMW 3 Series *For E46 M3 see separate listing*
Please note, our race kits do not add steering angle, and often will reduce steering clearance slightly because they are designed with a delta shape in place of the L-shape factory arms to provide a stronger arm with direct load paths for minimum weight.
Lightweight tubular high strength control arm set, including matched Billet 7075-T6 Aluminum roll-center, bump-steer and quick steering geometry plates. Each control arm is 100% TIG welded in house by a master of the craft. Built to OEM control arm length by default. These are some of the lightest and strongest front control arms available on the market. If you have a little extra room under the fenders, instead of adding spacers or low offset wheels we can build the arms to suit +54mm or +108mm Track width in order to increase your track while maintaining your scrub radius as close to stock as possible for better, more neutral steering feel and control. Unlike our drift kits we do not build the race kit with maximum angle clearance in mind, this kit is built with the sole purpose of lowering your lap times.
No sway bar provision by default as we recommend the M3 style strut sway link, but a control arm sway link provision can be added as an option if requested.
The arms are affixed with custom designed and developed hardware proudly machined in the USA by SLRspeed from forged 4140 billet steel.
This kit bundles four expensive upgrades for your car into one affordable package:
- Lightweight chromoly control arms(40% arm weight reduction for e30/e36)
- Roll-center correction
- Bump-steer correction
- Quick-ratio steering
Compare to other companies that charge nearly as much for simply a pair of control arms and hardware that you will need to purchase additional parts to get the same -benefits as our complete package.
Please contact us about custom widths beyond our online catalog listed here 561-485-9997
**PLEASE NOTE** All E36 race arms are built to 93-95 M3 geometry unless otherwise requested, (96+ Evo 3.2L geometry can be built, but has less clearance for larger tires) additional caster can be gained by using our adjustable lollipop (FCAB) as well as caster top mounts.
Kit Features
- 40%* faster steering ratio
- 34mm roll-center correction
- Matching bump-steer correction
- 4-position adjustable ackerman (zero, low, medium, high)
What's in box
- SLR Lower Control Arms x2
- SLR Inner & Outer Balljoint studs
- SLR Billet Bump-steer / Roll-center /Steering Adapters x2
- SLR Adjustable Outer Tie Rods x2
- SLR Billet tie-rod tubes x2
- SLR Slip on Steering Rack Limiters (1 set)
- All hardware for 100% bolt-on installation
- SLR Installation Manual & decals
- E46/Z4 kits will include Delrin lollipop bushings by default
Please Include year and model in the notes once you have placed your order.
Orders typically ship within 10 business days
* Steering quickening determined by 40% more actual front wheel angle per mm of lock. Or in other words, instead of the front wheels turning 10° in the first half-turn of the steering, they will now turn 14°. Many customers still combine the kit with a Z3 rack for ultra-fast steering.
INTERNATIONAL ORDERS: Please be aware your country may charge import fees of up to 20% in some cases. If delivery is refused, return shipping costs us 4x the original shipping fee, so we will charge a 50% restocking fee. By purchasing you agree to these terms.
Let customers speak for us
from 217 reviewsBrian”s great! Fast shipping great communication.
smooth ride even bottomed out, Brain does great on his customer service
Fit perfect
THIS IS AN AWESOME COMPANY TO DO BUSINESS WITH, THEY ARE VERY PROMPT TO TAKE CARE OF YOUR ORDER AND THEIR PRODUCTS ARE THE VERY BEST. AWESOME JOB!!!
I've tried 3 different diff mounts. The Lux Mount by SacCity, AMT Double Barrel, and just for the **** of it the Duralast c5 mount. Finally bought this 954 Bullet from FI Performance. In a nutshell the 954 had the least NVH of them all and best of all zero wheel hop even with crappy tires. Thanks Mr. Brian for your vast knowledge on this subject.
I purchased this kit and the install was fairly straightforward, the quality of the kit is amazing!!! Made a very noticeable difference in tightening up the entire suspension, and I did not notice an increase in NVH.
I can't say enough about silvers and brian. I recently got into an accident that broke one of my coilovers. Brian immediately reached out to his people and got me a single coilover. You can't go wrong with silvers or brian.
I am well pleased in choosing brian and crew for my coilovers. They have been very helpful and got me my order right away.
worked perfect. Install was a breeze! everything was great! Except for the waiting period due to transitioning. maybe next order will be super quick. Thanks Brian for keeping in touch.👍🏼
These are by far a major upgrade over stock the oem rubber mounts couldn't take the abuse and shredded leaking luid all over the engine bay and leaving my engine flopping the amt mounts are a mix of metal on the outside and inside and a hard rubber "bushing" in the middle giving you the best of both worlds and making it durable and everything tighter very easy to install and torque down looks better and definitely feels better very minimal increase in noise and vibration but not enough to really notice or effect everyday driving a must have for higher horsepower applications or if you just beat the **** out of it.
This is a high quality 3D printed guage mount that is installed and replaces the driver's left side heat vent to mount your gauge to and it will still blow air through it without any issues as it's vented on the top and bottom it installs very easy and fast and will fit multiple different gauges and is very sturdy and strong if you have a AEM guage this is not the correct mount they make a specific mount for the AEM gauges.
This bracket is for the c6 corvettes with the Z51 package only not the Z06 they have different coolers and therefore different brackets with that being said this bracket works fantastic definitely when using it with the A&A supercharger kit and don't want to delete your oil cooler like me and so this allows you to move your cooler to a different location and out of the way and still be able to use it with the supercharger.
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!
These are a great upgrade for the rear suspension!! Love the adjustability and the look of them much better than stock. Brian always gives excellent customer service and the parts ship out very fast.