Our 350z Knuckle adaptor makes use of 3 available points on the knuckle, to relocate where the outer tierod connects and allows for the Ackerman to be adjusted in multiple different positions from positive to negative, simply and efficiently without removing any hardware (only loosening) in under 1 minute. This adaptor can also be used with any control arms available, included OEM gktech and parts shop max. giving you the adjustability you need even with different control arms.

-To adapt this to your FDF kit, you will only need the adaptor bracket (unless you want to add the other options for replacements or spares)

-to adapt this to OEM arms or other angle kitsyou will need the outer rod end AND the tierod adaptor

-Angle, 65 degrees (depending on control arm setup)

-Ackerman, +2 degrees to -2 degrees of Ackerman (and everything in between) when measured at full lock

-Bump steer, corrected by perfecting tie-rod offset LCA ball joint

-Caster, factory caster when using stock UCA or adjustable caster when paired with FDF UCA

-Camber, optimized camber at -5.5 to counteract caster at full lock.

-Track Width, adjustable range from 25mm-50mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel

-Joints, Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable

-Weight Reduction, scissor frame constructed alloy steel, 7075 aluminum used where possible

please allow 2 weeks build time for this product

403