AFS Corvette C5 Roll Cages

$1,099.00
*
*
Qty:

FI Performance / AFS Partnership for Roll Cages.

The AFS Roll Cages are highly engineered to provide a safer cockpit for various forms of Motorsport.  Certain areas require more mounting points like Formula Drift and NHRA Under certain times to pass tech inspections and we are developing those new kits to cover those requirement so stay tuned for that.

Why did we select a company that doesn't produce a bolt-in kit?  The answer is simple, strength and when you are putting your a$$ on the line in a racing environment wouldn't you want the safest product around you...?... We would!

6 Point Corvette C5 Z06/FRC & Coupe
1.75" .120 wall mild steel DOM
Good for NHRA 6.35/9.99 e.t.

Upgrades Options Available:
- Material Upgrade - 1.75" .083 Wall Chromoly Steel: $275

- Swing Out Door Bars: $100
We use Competition Engineering's Door Bar Kit's and should you decide to do the upgrade, the parts would be shipped directly from Summit Racing to you.  There are 2 different version depending on tubing thickness.  These Competition Engineering swing-out door bar kits feature a release pin and hinge bracket to help you get in and out of your roll-bar equipped car easily--no more crawling over the bars to get in! They are made from 1 3/4 in. x .134 in. wall mild steel tubing. 

This is a weld-in kit that must be done by a certified welding professional because your cage is only as strong as it's weakest weld point.  Good welders are not cheap so be aware of this before ordering.  Below is a list of equipment you will need for install and this is page 1 of 11 in our highly detailed instruction manual:

Tools needed:
- Mig or Tig Welder. No flux core wire!
- 4 1⁄2” angle grinder with cut off and flap disc wheels
- Safety glasses and dust mask
- Chop saw, or metal band saw, or Sawzall
- Drill
- Large flat chisel/scraper. Or worst case a large flat head screwdriver sharpened- .
- 1/8” aluminum rivets
- Thin sheet aluminum. 2 pieces 6 inches by 6 inches.
- Rivet gun
- Silicone
- Fire extinguisher (Safety 1st guys!)

Paint of choice. We like to use Rustoleum Hammer finish paint. You brush it on directly to raw metal. Its
available at any hardware store.
Wear your safety glasses and dust mask at all times!
All tubes must be properly coped and beveled for proper welding and penetration.
Use a certified welding professional to weld your roll bar kit!

F.A.Q.

Q: How long does it take to ship a kit?
A: If we have your kit in stock, usually about 1-3 days for packaging and freight pickup

Q: What if you don't have a kit in stock?
A: If we have the materials in stock, figure about 1 week to bend, check and box.

Q: What if you are out of materials for the kit I want?
A: Our material suppliers usually deliver our orders with a week, then build time so figure about 2 weeks before we ship. 

Q: Are your kits certified?
A: Yes, we follow NHRA guidelines and kit certification is noted above.

Q: What about other certifications like NASA, Formula Drift etc.
A: Email or call us.

Q: Should i stick with mild steel or go with chromoly?
A: If you are at this level of racing, might as well step up.

Q: Can a 6 point cage be upgraded to 8 or 10 point?
A: Yes, it's work but can be done on your end...

Q: Why are your kits so much more cost effective vs. RPM Roll Cages?



A: Because we are :-) !

Shipping $50 Regardless or state (lower 48)
to either business or residential, it's all the same.

  • Availability: In Stock
  • Model: AFS C5 Roll Cage

Write Review

Note: Do not use HTML in the text.